Leaky pumps, accidental spills, and rainwater accumulate on the hull, specifically in the bilge.

we’ve put together a collection of the best Bilge Pumps that are currently available on the market. To help you find the perfect Bilge Pump among a wide variety of options, we constantly update our collection with new and trending models.

10 Best Bilge Pumps

Based on dozens of customer reviews and ratings, the followings are the top 10 best-selling Bilge Pumps:

Top Rated Bilge Pump Reviews

Since we’ve mentioned 10 different models of Bilge Pumps on the above list, it may be difficult for you to find the right one for your needs. This is why we listed the key features of each of these Bilge Pumps below:


Product Highlights:

  • Flow Rate (GPH): 1100GPH; Volt: 12V; Current(A): 3.8A; Head(M): 3.0M
  • Wire Lead(M): 1m; Outlet Diameter: 29mm/ 1.14 Inch (1-1/8″); Width: Approx. 81mm
  • Built-in float switch! (No separate float switch is needed)
  • No power use until pump is activated by internal float switch (when water level rises)
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation


Product Highlights:

  • A genuine Rule product, don’t settle for less
  • Heavy duty construction for both commercial and pleasure boat use
  • Known for trouble free operation and reliability
  • 1-1/2″ (38mm) discharge outlet

Product Highlights:

  • A genuine Rule product, don’t settle for anything less
  • More pumping capacity and more exclusive design features than any comparable competitive pump at a lower cost
  • 1-1/8 inch (28. 6 millimeter) hose barb discharge outlet
  • Compact, efficient, long-life motors, able to run dry for short periods
  • Silent and vibrationless operation, stainless steel shaft, completely submersible, rust and corrosion resistant
  • Sport type: Boating

Product Highlights:

  • Included Components: Rule 02 Higher Capacity Bilge Pump – 1500 Gph, 5678 Lph, 12V
  • Material Type: Canvas
  • Sport Type: Boating

Product Highlights:

  • Anti-leak design with a removable 36 inch
  • Large Ergonomic, easy grip, high impact handle
  • Self-priming pump
  • Reaches small, compact areas with ease
  • Plunger washer forces water up and thru the Outlet
  • Anti-Leak Design Removable Hose For Easy Storage Self-Priming Reach Small, Compact Areas With Ease Light Weight Corrosion Resistant
  • Large ergonomic, easy grip, high impact handle.
  • Tube cap. Caps the tube and forces the water out of the outlet and also supports the plunger shaft.
  • Plunger spacer keeps the shaft from coming up too far and damaging the plunger washer.
  • Plunger washer forces water up and thru the outlet.

Product Highlights:

  • Flow Rate: 1100 GPH; Voltage: 12 VDC
  • Flow: 1100 gallons per hour or 5000 L / hour, Head: 13 Ft (4mts), Outlet Dia. 1-1/8″ (29mm)
  • Typical Uses: Suitable for hydraulic systems fed with cold water—used in line to be fed by gravity or pressure
  • Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, Etc
  • Built for the harsh marine environment, are suitable to withstand the most adverse condition. The water-cooled engine ensures a long service life

Product Highlights:

  • Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency
  • Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection
  • Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged.
  • Easy to Install: Design common installation location and it can use with the bilge switch
  • Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water

Product Highlights:

  • Sahara bilge pumps include 36 inch lengths of 16-gauge tinned copper wire
  • Wire is caulked to prevent water from wicking through insulation jacket
  • All materials and components are state-of-the-art
  • Permanent-magnet motor, stainless steel shaft, and steel-reinforced seal ensure powerful, durable performance
  • S750 is sized for larger recreational boats
  • Our most powerful 3/4 inch-outlet automatic pump 750 GPH at open flow, 625 GPH at 3.3 feet head, 3/4 inch hose outlet

Product Highlights:

  • Marine Pump Specification: Flow Rate: 1100GPH; Voltage: 12V; Current: 3.0A; Head: 3.0M, Wire Lead: 1M, Outlet Dia: 19mm(3/4″), Dimension: 15*8*10CM
  • Long Life Motor : Water cooled motors for long life, with anti airlock design and moisture tight seals. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
  • Built-in float switch Bilge Pump: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning
  • Durable: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing.
  • Package Included: 1 x1100GPH Automatic Submersible Boat Bilge Water Pump

Video Overview

All about boat bilge pumps. How and why to do a quick check to make sure it's working.

Bilge pumps on your boat. What they do, and why we need to check them to make sure they’re working! If you don’t know anything about a bilge pump – I quickly …

Final Words

So, these are all of the Best Bilge Pumps available on the market. We hope this collection was helpful to find the right Bilge Pump for the money. However, we recommend checking out the features, benefits, and problems of each of these Bilge Pumps before taking your decision.